top of page
Machine Learning

PyTorch Training Error Help — We Fix It for You

A training loop that learns properly and produces a usable model. From $99 · 48h delivery.

Common signs: loss not decreasing, NaN loss and shape errors. Usual causes: optimizer and gradient bugs, bad normalization and label errors. What we do: debug loop, fix bugs and verify learning. What you get: fixed code, training curves and notes.

Our PyTorch training error help service fixes training loops that do not learn, so you end up with a model you can actually use. When the loss will not go down, turns into NaN, or the run crashes with shape and device errors, hours of trial and error rarely find the cause. A Codersarts machine learning engineer debugs your PyTorch or TensorFlow training loop, fixes the bugs in the optimizer, gradients, data and labels, and verifies that the model learns with clear training curves. Fixed price from $99 with 48-hour delivery for a standard fix.




Training Loop Fix at a Glance


Item

Details

Starting price

$99 for one training script or notebook

Delivery

48 hours for a standard fix

Frameworks

PyTorch, PyTorch Lightning, TensorFlow and Keras, JAX and Flax, Hugging Face Trainer and Accelerate

Problems fixed

Loss not decreasing, NaN or infinite loss, exploding or vanishing gradients, shape and dtype errors, device mismatches, data loader bugs

Model types

CNNs, transformers, RNNs and LSTMs, GANs, autoencoders, tabular neural networks and fine-tuning scripts

What you get

Fixed code, training curves and notes

Revisions

One revision round included



What Is a Training Loop Fix?


A training loop fix is the process of finding and correcting the bugs that stop a neural network from learning. It covers the code that loads data, runs the forward pass, calculates loss, backpropagates gradients and updates weights, and checks normalization, labels, learning rate, loss function, gradient flow and device placement until training curves show the model learning as expected.

Deep learning bugs are frustrating because the code often runs without errors while the model silently learns nothing. A missing zero_grad call, labels in the wrong format, a softmax applied twice or a learning rate far too high can all produce flat or exploding loss. A systematic debugging process checks each part of the loop in order, so the real cause is found rather than guessed.



Signs Your Training Loop Is Broken


  • The loss stays flat or barely moves after many epochs

  • The loss becomes NaN or infinity after a few steps

  • Training accuracy stays at chance level, such as 10% for 10 classes

  • Runtime errors such as "mat1 and mat2 shapes cannot be multiplied" or "Expected all tensors to be on the same device"

  • Errors such as "element 0 of tensors does not require grad" during backward

  • Loss decreases in training but validation metrics do not change at all

  • A model that trained before stopped learning after a code change or library update

  • Results change dramatically between runs with the same settings



Why Training Loops Fail


Optimizer and gradient bugs


Forgetting to call optimizer.zero_grad, calling backward on the wrong tensor, detaching tensors by accident, freezing the wrong layers or passing the wrong parameters to the optimizer all stop learning or corrupt gradients.


Learning rate and scheduler problems


A learning rate that is too high causes exploding loss and NaN values; one that is too low makes training look stuck. Schedulers stepped at the wrong time make this worse.


Bad normalization and preprocessing


Inputs on the wrong scale, mismatched normalization between training and validation, or images in the wrong channel order make learning slow or unstable.


Label and loss mismatches


Using one-hot labels with a loss that expects class indices, applying softmax before a loss that already includes it, or using the wrong loss for the task are very common silent bugs.


Shape, dtype and device errors


Tensors with unexpected dimensions, float and integer mixes, and parts of the model or data left on the CPU cause crashes or wrong results.


Data loader bugs


Shuffled inputs separated from their labels, broken augmentations or a data loader that returns the same batch repeatedly can make any model fail.



Fastest Checks You Can Try First


  1. Try to overfit a single small batch; if the loss cannot reach near zero, the bug is in the loop, the loss or the labels.

  2. Print the shapes, dtypes, devices and value ranges of inputs, labels and outputs for one batch.

  3. Lower the learning rate by a factor of ten and check whether NaN loss disappears.

  4. Confirm optimizer.zero_grad, loss.backward and optimizer.step are called once per step in that order.


If the problem remains, our engineers take it from there.



How We Fix Your Training Loop


  1. Reproduce the problem. We run your code on your data or a sample and capture the error, loss curve and gradient behavior.

  2. Check data and labels. We inspect batches, labels, normalization and augmentations for mismatches and corruption.

  3. Check the model and loss. We verify output shapes, activation and loss choices, and that the loss matches the label format.

  4. Check gradients and optimizer. We inspect gradient flow layer by layer, the optimizer parameters, learning rate and scheduler.

  5. Fix and verify. We fix the bugs, confirm the model can overfit a small batch, then run full training and compare curves.

  6. Hand over. You receive fixed code, before and after training curves and notes explaining each bug and fix.



Common Errors and Their Usual Causes


Error or symptom

Usual cause

Loss is NaN

Learning rate too high, log of zero, division by zero, bad input values or mixed precision overflow

Loss does not decrease

Missing zero_grad, wrong parameters in optimizer, frozen layers, learning rate too low, label mismatch

Shapes cannot be multiplied

Wrong flatten size, missing batch dimension or wrong input size for a layer

Tensors on different devices

Model on GPU while data or a new tensor stays on CPU

Expected Long but found Float

Class labels in float format for a classification loss

Accuracy stuck at chance

Labels shuffled separately from inputs, wrong loss, or predictions taken from the wrong output

Validation never improves

Model in train mode during evaluation, data leakage or a broken validation pipeline



What You Get


  • Fixed training code or notebook

  • Before and after training and validation curves

  • Notes explaining each bug found and how it was fixed

  • A quick sanity-check routine you can reuse, such as single-batch overfitting

  • Recommended settings for learning rate, batch size and scheduler


Example fix summary (illustrative)


An image classifier's loss stayed flat at 2.3 for 20 epochs. The fix notes show three issues: labels passed as one-hot vectors to cross-entropy, softmax applied before the loss, and the learning rate scheduler stepping every batch instead of every epoch. After the fixes, the model overfits a small batch in under a minute and full training reaches stable validation accuracy.



What Is Included and Not Included


Included

Not included

One training script or notebook per starting-price package

Several unrelated projects

Debugging data, model, loss, gradients and optimizer

Designing a new model architecture from scratch

Verification runs and training curves

Long training runs on very large datasets

Fix notes and recommended settings

Hyperparameter search for maximum accuracy

One revision round

GPU or cloud compute costs



Pricing for Training Loop Fixes


Package

Best for

Starting at

Delivery

Standard fix

One training script with a clear failure

$99

48 hours

Complex fix

Multi-GPU, custom losses, mixed precision or several interacting bugs

$199

1 day

Training pipeline review

Full pipeline audit, reproducibility, logging and performance tuning

$599

3 days


You get a fixed quote after reviewing your code. You approve the scope before any payment.



Codersarts vs Forums vs Debugging Alone


Factor

Codersarts

Forum or Q&A site

Debugging alone

Works on your actual code

Yes

Only snippets you post

Yes

Speed

48 hours for standard fixes

Depends on replies

Unpredictable

Finds multiple hidden bugs

Systematic check of the whole loop

Usually answers one question

Trial and error

Verified with training curves

Yes

No

Depends

Explanation of each fix

Included

Varies

Not applicable



Who This Is For


  • Students and researchers whose models will not train before a deadline

  • ML engineers stuck on NaN loss, shape errors or flat curves

  • Startups building custom deep learning models

  • Developers new to PyTorch or TensorFlow fine-tuning a model for the first time

  • Data scientists moving from scikit-learn to deep learning



What We Need From You


  • The training code or notebook and any custom modules

  • A sample of the data, or instructions to access it

  • The full error message or training logs, and your framework and library versions

  • What the model should predict and what results you expect


Code and data privacy


We sign an NDA on request, can work with a data sample, and do not share your code. You own all fixed code and notes.



Good Practices We Leave in Your Code


  • Seeded runs so results can be reproduced

  • Clear train and eval modes around training and validation steps

  • Gradient clipping where training is prone to spikes

  • Logged metrics and learning rate for every epoch, ready for TensorBoard or Weights and Biases

  • Assertions on shapes and devices at key points to catch future bugs early



Hugging Face and Lightning Projects


Many training issues today happen inside higher-level tools such as the Hugging Face Trainer, Accelerate or PyTorch Lightning. The same principles apply, but bugs often hide in configuration: tokenizer padding, label columns, data collators, gradient accumulation settings or callbacks. We debug these setups directly, without forcing you to rewrite them in plain PyTorch.



Key Terms Explained


  • Training loop: the code that repeatedly loads data, computes predictions and loss, and updates model weights.

  • Backpropagation: computing gradients of the loss with respect to each weight.

  • Exploding gradients: gradients that grow very large, causing unstable updates and NaN loss.

  • Vanishing gradients: gradients that become very small, so early layers stop learning.

  • Overfitting a single batch: a sanity check where the model should learn one small batch almost perfectly if the loop is correct.



Common Mistakes We Avoid


  • Changing many settings at once so the real cause stays hidden

  • Tuning hyperparameters before confirming the loop can learn at all

  • Ignoring warnings about dtype or device that later become silent bugs

  • Evaluating in train mode with dropout and batch normalization active

  • Fixing one symptom without checking for other bugs in the same loop



Related Tasks




Frequently Asked Questions


Why is my PyTorch loss not decreasing?

Common causes are a missing zero_grad call, a learning rate that is too low or too high, wrong parameters passed to the optimizer, frozen layers and labels that do not match the loss function.

Usually a learning rate that is too high, invalid input values, log or division by zero, or overflow in mixed precision training.

At Codersarts a standard training loop fix starts at $99 with 48-hour delivery.

Yes. We fix PyTorch, PyTorch Lightning, TensorFlow, Keras, JAX and Hugging Face training code.

Yes. Shape, dtype and device mismatch errors are among the most common issues we fix.

A representative sample is usually enough to reproduce and fix the problem.

The fix makes the model learn properly, and further accuracy work is available as a separate task.

Fixed code, before and after training curves, notes on each bug and recommended settings.



Get Your Model Learning Again


A training loop that does not learn wastes days of compute and effort. Share your code, a data sample and the error, and a Codersarts machine learning engineer will find every bug, fix it and prove the model learns with clear training curves.


bottom of page